When CyberLink software encounters an unexpected situation and crashes, you may see the CyberLink Issue Reporter window, displaying the error message "PowerDirector.exe has stopped working."
pdr exe has stopped working
To quickly resolve your problem, we recommend download and use pdr.exe Fix Tool,this tool perform a scan for pdr.exe issues and other system errors. It will also check if all .dll and .exe files are registered in the system and scan for other issues that may be preventing system from working properly. After the scan process, it will allow you to repair the errors.
I had a similar error but during the deployment of the UWP application. Finally, I found out the process that used a file that caused this error and stopped it. Credits to this link. Copy-pasted version is below.
Recently ran into this problem when attempting to build a solution I am working on (not just a winforms proj).In addition to build failure, I noticed that cleaning projects would quietly fail (checking the bin folder showed that the files had not actually been erased) and closing the Visual Studio did not end the devenv process - rather, it caused it to crash. Windows recovery process would then restart the Visual Studio.
After some trial and error, I found the problems only happened to me when I opened the solution from the "Recent" menu on starting up VS.Opening the solution from File >> Open >> Project/Solution found it working as per usually.
I had the same issue on my Xamarin application in visual studio and it was resolved by unplugging my test mobile device. The application was closed and the debugger was stopped but the error was still happening when trying to build or rebuild the solution. It only stopped after i unplugged the device because i had to receive a call.
I had the same issue and could not rectify by using any of the methods mentioned in previous answers. I resolved the issue by killing all instances of "SSIS Debug Hist (32 bit)" in task manager and now working as normal.
OK, good to know... ?\",\"author\":\"username\":\"former.member\",\"displayName\":\"Former Member\",\"groupIcons\":[],\"suspended\":true,\"isCurrentUser\":false,\"parentAuthor\":\"username\":\"janos.mucsi-besze\",\"displayName\":\"Janos Mucsi-Besze\",\"groupIcons\":[\"name\":\"employee\",\"title\":\"This user is an SAP Employee\",\"priority\":21],\"suspended\":false,\"isCurrentUser\":false,\"id\":10885926,\"creationDate\":1399294111000,\"activeRevisionId\":11442243,\"lastActivity\":1399294112000,\"parentId\":10885737,\"originalParentId\":10876301,\"likeCount\":1,\"visibility\":\"full\",\"depth\":0,\"attachments\":[],\"canVoteUpOrCancel\":false,\"relations\":\"canReport\":false,\"visibility\":\"full\",\"canEdit\":false,\"canUseDelete\":false,\"isLiked\":false,\"type\":\"comment\",\"canVoteUpOrCancel\":false,\"canConvertToAnswer\":false,\"canBeModerated\":false,\"canViewRevisions\":false,\"score\":1,\"showInReply\":false,\"reported\":false,\"canCancelReport\":false,\"canDelete\":false,\"canVoteDownOrCancel\":false,\"canComment\":false,\"canViewReports\":false,\"isCurrentUserAuthor\":false,\"liked\":false,\"moderatorComment\":false}]},\"10876590\":\"rootParentId\":10876590,\"commentsCount\":2,\"comments\":[\"body\":\"I wouldn't have created a symlink like this; it may work though.And probably you will need yet another symlink; I remember having read about libnnz11.so in a SAP note.I haven't the number at hand; please do the search yourself!\\n\\nregards\",\"author\":\"username\":\"former.member\",\"displayName\":\"Former Member\",\"groupIcons\":[],\"suspended\":true,\"isCurrentUser\":false,\"parentAuthor\":\"username\":\"former.member\",\"displayName\":\"Former Member\",\"groupIcons\":[],\"suspended\":true,\"isCurrentUser\":false,\"id\":10876726,\"creationDate\":1398851297000,\"activeRevisionId\":11434569,\"lastActivity\":1398851298000,\"parentId\":10876671,\"originalParentId\":10876301,\"likeCount\":0,\"visibility\":\"full\",\"depth\":0,\"attachments\":[],\"canVoteUpOrCancel\":false,\"relations\":\"canReport\":false,\"visibility\":\"full\",\"canEdit\":false,\"canUseDelete\":false,\"isLiked\":false,\"type\":\"comment\",\"canVoteUpOrCancel\":false,\"canConvertToAnswer\":false,\"canBeModerated\":false,\"canViewRevisions\":false,\"showInReply\":false,\"reported\":false,\"canCancelReport\":false,\"canDelete\":false,\"canVoteDownOrCancel\":false,\"canComment\":false,\"canViewReports\":false,\"isCurrentUserAuthor\":false,\"liked\":false,\"moderatorComment\":false],\"10885738\":\"rootParentId\":10885738,\"commentsCount\":7,\"comments\":[\"body\":\"OK if i do a new install from the Client v11. (with runInstaller)\\n\\nto /oracle/client/instantclient_11203\\nthen do a link in /orcle/client\\n\\nln -s instantclient_11203 instantclient\\n\\nfix the path in .dbenv_.sh and .dbenv_.csh\\n\\nshould it then work ?\\n\\n\\nMedia: 51041940\\n\\nOCL11264.SAR\",\"author\":\"username\":\"former.member\",\"displayName\":\"Former Member\",\"groupIcons\":[],\"suspended\":true,\"isCurrentUser\":false,\"parentAuthor\":\"username\":\"reagan.benjamin\",\"displayName\":\"Reagan Benjamin\",\"groupIcons\":[\"name\":\"moderator\",\"title\":\"This user is an SAP Moderator\",\"priority\":20],\"suspended\":false,\"isCurrentUser\":false,\"id\":11034442,\"creationDate\":1404455345000,\"activeRevisionId\":11566004,\"lastActivity\":1404455578000,\"parentId\":11033274,\"originalParentId\":10876301,\"likeCount\":0,\"visibility\":\"full\",\"depth\":0,\"attachments\":[],\"canVoteUpOrCancel\":false,\"relations\":\"canReport\":false,\"visibility\":\"full\",\"canEdit\":false,\"canUseDelete\":false,\"isLiked\":false,\"type\":\"comment\",\"canVoteUpOrCancel\":false,\"canConvertToAnswer\":false,\"canBeModerated\":false,\"canViewRevisions\":false,\"showInReply\":false,\"reported\":false,\"canCancelReport\":false,\"canDelete\":false,\"canVoteDownOrCancel\":false,\"canComment\":false,\"canViewReports\":false,\"isCurrentUserAuthor\":false,\"liked\":false,\"moderatorComment\":false],\"11269470\":\"rootParentId\":11269470,\"commentsCount\":2,\"comments\":[\"body\":\"I can confirm this, AFAIK this is the correct setup.\",\"author\":\"username\":\"former.member\",\"displayName\":\"Former Member\",\"groupIcons\":[],\"suspended\":true,\"isCurrentUser\":false,\"parentAuthor\":\"username\":\"anoarul.islam\",\"displayName\":\"Mohammad Anoarul Islam\",\"groupIcons\":[],\"suspended\":false,\"isCurrentUser\":false,\"id\":11270154,\"creationDate\":1413200643000,\"activeRevisionId\":11762460,\"lastActivity\":1413200645000,\"parentId\":11269723,\"originalParentId\":10876301,\"likeCount\":0,\"visibility\":\"full\",\"depth\":0,\"attachments\":[],\"canVoteUpOrCancel\":false,\"relations\":\"canReport\":false,\"visibility\":\"full\",\"canEdit\":false,\"canUseDelete\":false,\"isLiked\":false,\"type\":\"comment\",\"canVoteUpOrCancel\":false,\"canConvertToAnswer\":false,\"canBeModerated\":false,\"canViewRevisions\":false,\"showInReply\":false,\"reported\":false,\"canCancelReport\":false,\"canDelete\":false,\"canVoteDownOrCancel\":false,\"canComment\":false,\"canViewReports\":false,\"isCurrentUserAuthor\":false,\"liked\":false,\"moderatorComment\":false],\"10876339\":\"rootParentId\":10876339,\"commentsCount\":2,\"comments\":[\"body\":\"Hi DS,Please check the below sapnote 819829 - Oracle Instant Client Installation and Configuration on UnixWith RegardsAshutosh Chaturvedi\",\"author\":\"username\":\"ashutosh.chaturvedi\",\"displayName\":\"Ashutosh Chaturvedi\",\"groupIcons\":[],\"suspended\":false,\"isCurrentUser\":false,\"parentAuthor\":\"username\":\"gaurav.rana\",\"displayName\":\"Gaurav Rana\",\"groupIcons\":[],\"suspended\":false,\"isCurrentUser\":false,\"id\":10876547,\"creationDate\":1398849448000,\"activeRevisionId\":11434418,\"lastActivity\":1398849451000,\"parentId\":10876339,\"originalParentId\":10876301,\"likeCount\":0,\"visibility\":\"full\",\"depth\":0,\"attachments\":[],\"canVoteUpOrCancel\":false,\"relations\":\"canReport\":false,\"visibility\":\"full\",\"canEdit\":false,\"canUseDelete\":false,\"isLiked\":false,\"type\":\"comment\",\"canVoteUpOrCancel\":false,\"canConvertToAnswer\":false,\"canBeModerated\":false,\"canViewRevisions\":false,\"showInReply\":false,\"reported\":false,\"canCancelReport\":false,\"canDelete\":false,\"canVoteDownOrCancel\":false,\"canComment\":false,\"canViewReports\":false,\"isCurrentUserAuthor\":false,\"liked\":false,\"moderatorComment\":false]}"); const simplifiedQuestionView = JSON.parse("true"); (function() window.pageContext = mergeDeep(pageContext, question: id: 10876301, plug: "brconnect-work-with-orasid-but-not-with-sidadm---l", votes: 0, questionTitle: "brconnect work with ora but not with adm - libclntsh.so.11.1: cannot open shared object file : No such file or directory", isClosed: false, isLocked: false, isRedirected: false, redirectedFromTitle: "", redirectedFromId: "", closedStatusData: JSON.parse(""), userVoted: false, relations: JSON.parse("\"canClose\":false,\"canUnredirect\":false,\"canReport\":false,\"visibility\":\"full\",\"canEdit\":false,\"canUseDelete\":false,\"canReopen\":false,\"type\":\"question\",\"canVoteUpOrCancel\":false,\"canViewRevisions\":true,\"canUnlock\":false,\"reported\":false,\"canVoteDownOrCancel\":false,\"canLock\":false,\"canCancelReport\":false,\"canComment\":true,\"isCurrentUserAuthor\":false,\"canViewReports\":false"), isQuestionAccepted: false , childToViewInfo: id: "" , comments: JSON.parse("\"10876511\":\"rootParentId\":10876511,\"commentsCount\":3,\"comments\":[\"body\":\"OK, good to know... ?\",\"author\":\"username\":\"former.member\",\"displayName\":\"Former Member\",\"groupIcons\":[],\"suspended\":true,\"isCurrentUser\":false,\"parentAuthor\":\"username\":\"janos.mucsi-besze\",\"displayName\":\"Janos Mucsi-Besze\",\"groupIcons\":[\"name\":\"employee\",\"title\":\"This user is an SAP Employee\",\"priority\":21],\"suspended\":false,\"isCurrentUser\":false,\"id\":10885926,\"creationDate\":1399294111000,\"activeRevisionId\":11442243,\"lastActivity\":1399294112000,\"parentId\":10885737,\"originalParentId\":10876301,\"likeCount\":1,\"visibility\":\"full\",\"depth\":0,\"attachments\":[],\"canVoteUpOrCancel\":false,\"relations\":\"canReport\":false,\"visibility\":\"full\",\"canEdit\":false,\"canUseDelete\":false,\"isLiked\":false,\"type\":\"comment\",\"canVoteUpOrCancel\":false,\"canConvertToAnswer\":false,\"canBeModerated\":false,\"canViewRevisions\":false,\"score\":1,\"showInReply\":false,\"reported\":false,\"canCancelReport\":false,\"canDelete\":false,\"canVoteDownOrCancel\":false,\"canComment\":false,\"canViewReports\":false,\"isCurrentUserAuthor\":false,\"liked\":false,\"moderatorComment\":false],\"10876590\":\"rootParentId\":10876590,\"commentsCount\":2,\"comments\":[\"body\":\"I wouldn't have created a symlink like this; it may work though.And probably you will need yet another symlink; I remember having read about libnnz11.so in a SAP note.I haven't the number at hand; please do the search yourself!\\n\\nregards\",\"author\":\"username\":\"former.member\",\"displayName\":\"Former Member\",\"groupIcons\":[],\"suspended\":true,\"isCurrentUser\":false,\"parentAuthor\":\"username\":\"former.member\",\"displayName\":\"Former Member\",\"groupIcons\":[],\"suspended\":true,\"isCurrentUser\":false,\"id\":10876726,\"creationDate\":1398851297000,\"activeRevisionId\":11434569,\"lastActivity\":1398851298000,\"parentId\":10876671,\"originalParentId\":10876301,\"likeCount\":0,\"visibility\":\"full\",\"depth\":0,\"attachments\":[],\"canVoteUpOrCancel\":false,\"relations\":\"canReport\":false,\"visibility\":\"full\",\"canEdit\":false,\"canUseDelete\":false,\"isLiked\":false,\"type\":\"comment\",\"canVoteUpOrCancel\":false,\"canConvertToAnswer\":false,\"canBeModerated\":false,\"canViewRevisions\":false,\"showInReply\":false,\"reported\":false,\"canCancelReport\":false,\"canDelete\":false,\"canVoteDownOrCancel\":false,\"canComment\":false,\"canViewReports\":false,\"isCurrentUserAuthor\":false,\"liked\":false,\"moderatorComment\":false],\"10885738\":\"rootParentId\":10885738,\"commentsCount\":7,\"comments\":[\"body\":\"OK if i do a new install from the Client v11. (with runInstaller)\\n\\nto /oracle/client/instantclient_11203\\nthen do a link in /orcle/client\\n\\nln -s instantclient_11203 instantclient\\n\\nfix the path in .dbenv_.sh and .dbenv_.csh\\n\\nshould it then work ?\\n\\n\\nMedia: 51041940\\n\\nOCL11264.SAR\",\"author\":\"username\":\"former.member\",\"displayName\":\"Former Member\",\"groupIcons\":[],\"suspended\":true,\"isCurrentUser\":false,\"parentAuthor\":\"username\":\"reagan.benjamin\",\"displayName\":\"Reagan Benjamin\",\"groupIcons\":[\"name\":\"moderator\",\"title\":\"This user is an SAP Moderator\",\"priority\":20],\"suspended\":false,\"isCurrentUser\":false,\"id\":11034442,\"creationDate\":1404455345000,\"activeRevisionId\":11566004,\"lastActivity\":1404455578000,\"parentId\":11033274,\"originalParentId\":10876301,\"likeCount\":0,\"visibility\":\"full\",\"depth\":0,\"attachments\":[],\"canVoteUpOrCancel\":false,\"relations\":\"canReport\":false,\"visibility\":\"full\",\"canEdit\":false,\"canUseDelete\":false,\"isLiked\":false,\"type\":\"comment\",\"canVoteUpOrCancel\":false,\"canConvertToAnswer\":false,\"canBeModerated\":false,\"canViewRevisions\":false,\"showInReply\":false,\"reported\":false,\"canCancelReport\":false,\"canDelete\":false,\"canVoteDownOrCancel\":false,\"canComment\":false,\"canViewReports\":false,\"isCurrentUserAuthor\":false,\"liked\":false,\"moderatorComment\":false],\"11269470\":\"rootParentId\":11269470,\"commentsCount\":2,\"comments\":[\"body\":\"I can confirm this, AFAIK this is the correct setup.\",\"author\":\"username\":\"former.member\",\"displayName\":\"Former Member\",\"groupIcons\":[],\"suspended\":true,\"isCurrentUser\":false,\"parentAuthor\":\"username\":\"anoarul.islam\",\"displayName\":\"Mohammad Anoarul Islam\",\"groupIcons\":[],\"suspended\":false,\"isCurrentUser\":false,\"id\":11270154,\"creationDate\":1413200643000,\"activeRevisionId\":11762460,\"lastActivity\":1413200645000,\"parentId\":11269723,\"originalParentId\":10876301,\"likeCount\":0,\"visibility\":\"full\",\"depth\":0,\"attachments\":[],\"canVoteUpOrCancel\":false,\"relations\":\"canReport\":false,\"visibility\":\"full\",\"canEdit\":false,\"canUseDelete\":false,\"isLiked\":false,\"type\":\"comment\",\"canVoteUpOrCancel\":false,\"canConvertToAnswer\":false,\"canBeModerated\":false,\"canViewRevisions\":false,\"showInReply\":false,\"reported\":false,\"canCancelReport\":false,\"canDelete\":false,\"canVoteDownOrCancel\":false,\"canComment\":false,\"canViewReports\":false,\"isCurrentUserAuthor\":false,\"liked\":false,\"moderatorComment\":false],\"10876339\":\"rootParentId\":10876339,\"commentsCount\":2,\"comments\":[\"body\":\"Hi DS,Please check the below sapnote 819829 - Oracle Instant Client Installation and Configuration on UnixWith RegardsAshutosh Chaturvedi\",\"author\":\"username\":\"ashutosh.chaturvedi\",\"displayName\":\"Ashutosh Chaturvedi\",\"groupIcons\":[],\"suspended\":false,\"isCurrentUser\":false,\"parentAuthor\":\"username\":\"gaurav.rana\",\"displayName\":\"Gaurav Rana\",\"groupIcons\":[],\"suspended\":false,\"isCurrentUser\":false,\"id\":10876547,\"creationDate\":1398849448000,\"activeRevisionId\":11434418,\"lastActivity\":1398849451000,\"parentId\":10876339,\"originalParentId\":10876301,\"likeCount\":0,\"visibility\":\"full\",\"depth\":0,\"attachments\":[],\"canVoteUpOrCancel\":false,\"relations\":\"canReport\":false,\"visibility\":\"full\",\"canEdit\":false,\"canUseDelete\":false,\"isLiked\":false,\"type\":\"comment\",\"canVoteUpOrCancel\":false,\"canConvertToAnswer\":false,\"canBeModerated\":false,\"canViewRevisions\":false,\"showInReply\":false,\"reported\":false,\"canCancelReport\":false,\"canDelete\":false,\"canVoteDownOrCancel\":false,\"canComment\":false,\"canViewReports\":false,\"isCurrentUserAuthor\":false,\"liked\":false,\"moderatorComment\":false]"), answerPager: answersCount: 7, page: 1, pageSize: 10, pageCount: 1, sort: "votes" , answers: JSON.parse("[\"body\":\"Hi,Please update release with 720 EXT & try again .You can also refer SCN thread brconnect: error while loading shared libraries ,\"body\":\"Have you created a symlink /oracle/client/10x_64 which points to /oracle/client/11x_64? And have you changed the logon scripts of all users?PS: Check as well.\",\"author\":\"username\":\"former.member\",\"displayName\":\"Former Member\",\"groupIcons\":[],\"suspended\":true,\"isCurrentUser\":false,\"id\":10876511,\"posted\":1398849369000,\"votes\":0,\"isAccepted\":false,\"isLocked\":false,\"userVoted\":\"\",\"relations\":\"canCancelAccept\":false,\"canUnlock\":false,\"canUseDelete\":false,\"canVoteDownOrCancel\":false,\"canLock\":false,\"canAccept\":false,\"type\":\"answer\",\"canVoteUpOrCancel\":false,\"isCurrentUserAuthor\":false,\"attachments\":[],\"body\":\"SAP has strict rules where to install an Oracle client; have a look at 819829 - Oracle Instant Client Installation and Configuration on Unix Afaik the paths are hardcoded in some SAP programs;not sure about it, but it might be worth a try to move the instantclient to /oracle/client/11x_64/instantclient, and adjust LD_LIBRARY_PATH accordingly.regards\",\"author\":\"username\":\"former.member\",\"displayName\":\"Former Member\",\"groupIcons\":[],\"suspended\":true,\"isCurrentUser\":false,\"id\":10876590,\"posted\":1398850450000,\"votes\":0,\"isAccepted\":false,\"isLocked\":false,\"userVoted\":\"\",\"relations\":\"canCancelAccept\":false,\"canUnlock\":false,\"canUseDelete\":false,\"canVoteDownOrCancel\":false,\"canLock\":false,\"canAccept\":false,\"type\":\"answer\",\"canVoteUpOrCancel\":false,\"isCurrentUserAuthor\":false,\"attachments\":[],\"body\":\"HelloCould you confirm under which user you ran those LDD command against brconnect ?LD_LIBRARY_PATH=/usr/sap//SYS/exe/run:/oracle/client/11x_64The evnironment variable should be /oracle/client/11x_64/instantclient which is a symbolic link to a directory called instantclient_11203ls -la /oracle/client/11x_64/instantclient_11203Change the permission of the files under /oracle/client/11x_64/instantclient_11203 to sidadm:sapsysRegardsRB\",\"author\":\"username\":\"reagan.benjamin\",\"displayName\":\"Reagan Benjamin\",\"groupIcons\":[\"name\":\"moderator\",\"title\":\"This user is an SAP Moderator\",\"priority\":20],\"suspended\":false,\"isCurrentUser\":false,\"id\":10876600,\"posted\":1398851077000,\"votes\":0,\"isAccepted\":false,\"isLocked\":false,\"userVoted\":\"\",\"relations\":\"canCancelAccept\":false,\"canUnlock\":false,\"canUseDelete\":false,\"canVoteDownOrCancel\":false,\"canLock\":false,\"canAccept\":false,\"type\":\"answer\",\"canVoteUpOrCancel\":false,\"isCurrentUserAuthor\":false,\"attachments\":[],\"body\":\"Hi,I know it sounds general, but note 819829 is the perfect answer. Also check the permissions of instant_client. Maybe check with other systems and look for any deviations.Since BR*Tools working perfectly with ora (and this user is the owner of instant_client directory and files) it must be a permission issue.Try do decompress the instantclient to another directory and check the default permissions.Regards,János\",\"author\":\"username\":\"janos.mucsi-besze\",\"displayName\":\"Janos Mucsi-Besze\",\"groupIcons\":[\"name\":\"employee\",\"title\":\"This user is an SAP Employee\",\"priority\":21],\"suspended\":false,\"isCurrentUser\":false,\"id\":10885738,\"posted\":1399291662000,\"votes\":0,\"isAccepted\":false,\"isLocked\":false,\"userVoted\":\"\",\"relations\":\"canCancelAccept\":false,\"canUnlock\":false,\"canUseDelete\":false,\"canVoteDownOrCancel\":false,\"canLock\":false,\"canAccept\":false,\"type\":\"answer\",\"canVoteUpOrCancel\":false,\"isCurrentUserAuthor\":false,\"attachments\":[],\"body\":\"Solution was install/extract the instantclient 11.2.0.4 from: 51047688.ZIPdo the symlink, and all is fine\",\"author\":\"username\":\"former.member\",\"displayName\":\"Former Member\",\"groupIcons\":[],\"suspended\":true,\"isCurrentUser\":false,\"id\":11036048,\"posted\":1404481381000,\"votes\":0,\"isAccepted\":false,\"isLocked\":false,\"userVoted\":\"\",\"relations\":\"canCancelAccept\":false,\"canUnlock\":false,\"canUseDelete\":false,\"canVoteDownOrCancel\":false,\"canLock\":false,\"canAccept\":false,\"type\":\"answer\",\"canVoteUpOrCancel\":false,\"isCurrentUserAuthor\":false,\"attachments\":[],\"body\":\"Hi, \\nIs this issue solved !! \\nI have similar problem, I am doing system copy for Enterprise Portal 7.0, from PRD to Sandbox by using SWPM 1.0 \\n \\nExport from PRD system is done successfully by SWPM 1.0. \\nNow I am doing import in Sandbox system. Everything is perfect till Create database statistics.. \\nThis phase is failing due to brconnect issue. As ora I am able to run brconnect and I can create the statistics also on OS level but it is not working for adm. \\n \\nOS: IBM AIX 6.1 \\nDB: oracle 10.2.0.4, using oracle client 10x.. \\nError Screenshot: \\n \\nhostname: adm > brconnect \\nCould not load program brconnect: \\n Dependent module libclntsh.a(shr.o) could not be loaded. \\nCould not load module libclntsh.a(shr.o). \\nSystem error: No such file or directory \\n \\nAs adm > env \\nLIBPATH=/usr/sap/SID/SYS/exe/run:/usr/sap/SID/SYS/exe/uc/rs6000_64:/oracle/client/10x_64/instantclient \\n \\nand \\nadm :> ls -ltr /oracle/client/10x_64/instantclient \\n \\n-rwxrwxr-x 1 pcpadm sapsys 70110326 Feb 25 2006 libociei.so \\n-rwxrwxr-x 1 pcpadm sapsys 4796980 Feb 25 2006 libnnz10.so \\n-rwxrwxr-x 1 pcpadm sapsys 24077164 Feb 25 2006 libclntsh.a \\n-rwxrwxr-x 1 pcpadm sapsys 5972886 Feb 25 2006 libocci.a \\n-rwxrwxr-x 1 pcpadm sapsys 22795273 Feb 25 2006 libocijdbc10.so \\n-rwxrwxr-x 1 pcpadm sapsys 1540330 Feb 25 2006 ojdbc14.jar \\n-rwxrwxr-x 1 pcpadm sapsys 1593906 Feb 25 2006 classes12.jar \\n-rwxrwxr-x 1 pcpadm sapsys 23503095 Mar 27 2006 libclntsh.so \\n \\nSo as per my understanding, Environment is ok and files are also exists in place... \\n \\nany expert can help please.... \\nAnoarul\",\"author\":\"username\":\"anoarul.islam\",\"displayName\":\"Mohammad Anoarul Islam\",\"groupIcons\":[],\"suspended\":false,\"isCurrentUser\":false,\"id\":11269470,\"posted\":1413191384000,\"votes\":0,\"isAccepted\":false,\"isLocked\":false,\"userVoted\":\"\",\"relations\":\"canCancelAccept\":false,\"canUnlock\":false,\"canUseDelete\":false,\"canVoteDownOrCancel\":false,\"canLock\":false,\"canAccept\":false,\"type\":\"answer\",\"canVoteUpOrCancel\":false,\"isCurrentUserAuthor\":false,\"attachments\":[]]"), answerForm: formAction: "/answers/10876301/post.json", textareaName: "body", textareaErrors: "", isAttachmentsEnabled: true, answerEditorialGuideline: title: "Before answering", content: "You should only submit an answer when you are proposing a solution to the poster\'s problem. If you want the poster to clarify the question or provide more information, please leave a comment instead, requesting additional details. When answering, please include specifics, such as step-by-step instructions, context for the solution, and links to useful resources. Also, please make sure that your answer complies with our Rules of Engagement.", links: [ title: "Rules of Engagement", href: " -of-engagement.html", ] , answerMinBodyLength: '10', answerMaxBodyLength: '20000' , currentUser: sapInternalId: '', permissions: canVoteUpOrCancel: false, canVoteDownOrCancel: false, canModerate: false, , isVotedUp: false, isVotedDown: false , alerts: alertModeratorMinLength : "It should be given a proper explanation about why the content is inappropriate.", alertModeratorMinLengthValue : "10", alreadyReportedMessage : "You already have an active moderator alert for this content." , url: profileApiBaseUrl: ' -api.services.sap.com', followUnfollowQuestion: '/sap/nodeSubscription.json', isFollowingQuestion: '/sap/isFollowingNode.json', vote: voteUp: '/commands/0/voteup.json', voteDown: '/commands/0/votedown.json', cancelVote: '/commands/0/cancelvote.json' , rss: answers: '/feed/10876301/answers.rss', answersAndComments: '/feed/10876301/comments-and-answers.rss' , authorizeUploadContext: type: 'answer' , atMention: userSearchServiceUrl: ' ', currentUserName: '', useNewUSSCORS: true, atMentionDelayMs: 100, showMentionInRedactor: true , attachmentSettings: commentMaxAttachments: '2', answerMaxAttachments: '10', commentMaxAttachmentSizeBytes: '1048576', answerMaxAttachmentSizeBytes: '1048576', commentAttachmentsSizeBytesTotal: '2097152', answerAttachmentsSizeBytesTotal: '10485760' , editor: editorClipboardUploadEnabled: true ) )(); Home
Community
Ask a Question
Write a Blog Post
Login / Sign-up Search Questions and Answers 0 Former Member Apr 30, 2014 at 08:23 AM brconnect work with ora but not with adm - libclntsh.so.11.1: cannot open shared object file : No such file or directory 2992 Views Follow RSS Feed Hi, 2ff7e9595c
Comments